ShopBot CNC Router with Vacuum Table, Computer System & Tooling - Barely Used

This ShopBot CNC Router was originally purchased by a school for an educational program, but the machine ultimately proved to be larger and more complex than what the program required. As a result, the equipment was set up and briefly used for initial setup and familiarization. It was never integrated into the program's regular instruction and has spent most of its life sitting idle.

This unit was not used in a commercial or production environment, and it did not see ongoing classroom or shop use. The machine was installed, tested and then largely unused, leaving it in excellent, near-new condition.

The CNC was last powered and operated approximately 21 months ago, at which time everything was fully functional. The machine remains under power and connected. Inspection appointments are encouraged.

Please note: This is not a plug-and-play type router. Proper operation requires CNC knowledge, appropriate software and configuration. A test cut may not be possible during inspection as the software may require renewal.

Included with the Machine:
- ShopBot CNC router
- Computer control system
- Vacuum table for material hold-down
- Several drill/router bits
- Owner's manual and guides

Approximate Specifications:
- Weight: ~3,500 lbs
- Dimensions: 8' L x 5' W x 4' H approximately
- condition: extremely light use / near-new due to minimal educational use

Current Market Pricing:
Comparable ShopBot CNC routers in the 4' x 8' class typically sell new for approximately $18,000 - $35,000+ depending on configuration, spindle options, and accessories. Used machines commonly sell at prices up to $20,000 depending on condition and hours of use.

This unit represents an opportunity to acquire a virtually new CNC router that has not experienced commercial production wear.

Important Notes:
- Machine is used but extremely lightly operated due to limited educational use.
- Inspection is strongly encouraged to verify configuration and condition prior to bidding.
- Some cosmetic blemishes may not appear in photos.
- No maintenance log available due to minimal use.
- Machine will need to be dismantled onsite to remove it from the room where it is located.
- Buyer is responsible for disassembly and removal; sell assumes no liability.