MILLTRONICS VKM4 CNC MILL
$3,000.00 USD
Schließt:
4d1h(Sep 03, 2026 08:00 PM UTC)
$50.00 USD
GebotserhöhungVerkaufs/Posten-Typ:
Online-Auktion
Standort:
Palo Alto , California, USAVorbehaltlich einer automatischen Verlängerung der Auktionsdauer.
Möglicherweise schlechtes Gebot
Das Mindestgebot beträgt USD 3,000.00.
Ist dies richtig?
If this is correct, to continue select "Accept Bid."
Falls dies nicht richtig ist oder Sie ein Max Auto-Gebot abgeben möchten, wählen Sie "Gebot ablehnen" aus.
Ist dies richtig?
If this is correct, to continue select "Accept Bid."
Falls dies nicht richtig ist oder Sie ein Max Auto-Gebot abgeben möchten, wählen Sie "Gebot ablehnen" aus.
BEOBACHTER: 6 |BESUCHER: 135
AGBs des Verkäufers
Weitere Artikel des Verkäufers
Beschreibung
| Manufacturer | MILLTRONICS |
| Model | VKM4 |
| Year of Manufacture | 2001 |
| Serial Number | 10612 |
| Condition | Used/See Description |
| Lot Number | 8067-673 |
Milltronics VKM4 Series E CNC vertical mill. Manufactured 10/2001. Serial No. 10612. 220 VAC, 3-phase, 50/60 Hz, 30 amp full-load current.
This machine was used by a high school robotics program and remained in use through the Spring 2026 robotics season. According to the robotics program, the CNC mill is functional. In recent years the machine has been operated with the quill kept approximately 2 cm below its highest position due to a limitation the program could not specifically recall the cause of.
The machine was retired primarily because its original control software runs on Windows 98 and there is no commercially available controller upgrade known to the program. The school also wanted students to gain experience with newer enclosed CNC equipment more representative of equipment currently used in industry.
The controller was upgraded in 2017 by a robotics mentor/software systems professional to accept G-code via USB thumb drive rather than floppy disk. Because of the age of the control software, compatibility with modern CAM-generated G-code is not guaranteed.
Known service/repair history includes:
2022 – D&L Precision Rebuilding: collet/tool stuck in automatic drawbar
2017 – CNC Solutions: quill return
There is a missing bolt on the head. According to the robotics program, the head can still be trammed, although the procedure is somewhat non-standard.
Included with the machine are its CNC controller/control console, associated control components and cables, keyboard, fabricated operator/workstation structure, and additional components/accessories shown in the photographs. Buyers should review all photographs to determine the exact items included in the sale.
The machine was professionally disconnected and relocated from its former classroom location to its current pickup location.
BUYER IS SOLELY RESPONSIBLE FOR ALL RIGGING, LOADING, REMOVAL, TRANSPORTATION, EQUIPMENT, AND PERSONNEL REQUIRED TO REMOVE THE MACHINE FROM ITS CURRENT LOCATION. Seller personnel will not dismantle, rig, lift, load, reconnect, or otherwise prepare the machine for transport.
Due to the size and weight of this equipment, the successful bidder should arrive with appropriately rated equipment and qualified personnel necessary to safely load and transport the machine. Buyers are strongly encouraged to inspect the machine and pickup location prior to bidding and plan accordingly.
The machine has not been operated or independently tested by the seller following professional disconnection and relocation.
Due to the age of the machine and control system, no guarantee is made regarding compatibility with current software, computers, CAM systems, or G-code. Prospective buyers are encouraged to inspect the machine and included components prior to bidding.
Sold AS IS, WHERE IS, with no warranties or guarantees expressed or implied.
This machine was used by a high school robotics program and remained in use through the Spring 2026 robotics season. According to the robotics program, the CNC mill is functional. In recent years the machine has been operated with the quill kept approximately 2 cm below its highest position due to a limitation the program could not specifically recall the cause of.
The machine was retired primarily because its original control software runs on Windows 98 and there is no commercially available controller upgrade known to the program. The school also wanted students to gain experience with newer enclosed CNC equipment more representative of equipment currently used in industry.
The controller was upgraded in 2017 by a robotics mentor/software systems professional to accept G-code via USB thumb drive rather than floppy disk. Because of the age of the control software, compatibility with modern CAM-generated G-code is not guaranteed.
Known service/repair history includes:
2022 – D&L Precision Rebuilding: collet/tool stuck in automatic drawbar
2017 – CNC Solutions: quill return
There is a missing bolt on the head. According to the robotics program, the head can still be trammed, although the procedure is somewhat non-standard.
Included with the machine are its CNC controller/control console, associated control components and cables, keyboard, fabricated operator/workstation structure, and additional components/accessories shown in the photographs. Buyers should review all photographs to determine the exact items included in the sale.
The machine was professionally disconnected and relocated from its former classroom location to its current pickup location.
BUYER IS SOLELY RESPONSIBLE FOR ALL RIGGING, LOADING, REMOVAL, TRANSPORTATION, EQUIPMENT, AND PERSONNEL REQUIRED TO REMOVE THE MACHINE FROM ITS CURRENT LOCATION. Seller personnel will not dismantle, rig, lift, load, reconnect, or otherwise prepare the machine for transport.
Due to the size and weight of this equipment, the successful bidder should arrive with appropriately rated equipment and qualified personnel necessary to safely load and transport the machine. Buyers are strongly encouraged to inspect the machine and pickup location prior to bidding and plan accordingly.
The machine has not been operated or independently tested by the seller following professional disconnection and relocation.
Due to the age of the machine and control system, no guarantee is made regarding compatibility with current software, computers, CAM systems, or G-code. Prospective buyers are encouraged to inspect the machine and included components prior to bidding.
Sold AS IS, WHERE IS, with no warranties or guarantees expressed or implied.
Fragen und Antworten
Haben Sie eine Frage oder möchten Sie einen Termin vereinbaren?
Verkäufer-Informationen
Artikelstandort:
Kontotyp:
Regierung
Überprüfung
Most items offered for sale are used and may contain defects not immediately detectable. Bidders may inspect the property prior to bidding. Inspection is by appointment only. Please see the contact above to schedule an inspection.
Bezahlung
PAYMENT
If you are the winning bidder, you will facilitate payment by referring to the My Bids section of your account.Note:
1. Payment is due within 5 (five) business days of auction closure.
2. Any invoice $5,000 or above requires payment via wire transfer.
3. Depending on your history with GovDeals, you may be limited to the number of auctions/transactions that you can participate in simultaneously AND/OR the dollar amount that you can pay via credit card, debit card or direct debit. For additional insight, please visit the Probation FAQ.
SALES TAX
When applicable, sales tax is calculated based upon the auction’s advertised location.If you are seeking sales tax exemption, you must complete Liquidity Services’ tax exemption form(s). We recommend doing this prior to the auction’s closure or before making payment. To do so, please visit Liquidity Services' Tax Exemption Submission Tool.
Entfernung
Property may be removed by appointment only and appointments must be made at least 24 hours in advance. Pickup times for this sale are during warehouse hours, M-F 7:00-2:00, by appointment. We Do Not Ship. All items must be removed within ten (10) business days from the time and date of issuance of the Buyer's Certificate.
The Buyer will make all arrangements and perform all work necessary, including packing, loading and transportation of the property. No Assistance will be provided. A daily storage fee of $10.00 may be charged for any item not removed within the 10 business days allowed and stated on the Buyer's Certificate.
Besondere Anweisungen
NOTICE: If you are the winning bidder and default by failing to adhere to this sellers terms and conditions your account with Liquidity Services WILL BE LOCKED.
Guaranty Waiver. All property is offered for sale 'AS IS, WHERE IS.' Palo Alto Unified School District, CA makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Description Warranty. Seller warrants to the Buyer that the property offered for sale will conform to its description. Any claim for misdescription must be made prior to removal of the property. If Seller confirms that the property does not conform to the description, Seller will keep the property and refund any money paid. The liability of the seller shall not exceed the actual purchase price of the property. ****** This agency does NOT provide SMOG CERTIFICATION or EMISSIONS RETROFIT******* **All smog related repairs and certifications for vehicles are the sole responsibility of the buyer as outlined in California Vehicle Code, Division 12, Section 24007.5.** TITLE 13 CALIFORNIA CODE DISCLOSURE OF REGULATION APPLICABILITY: An on-road heavy-duty diesel or alternative-diesel vehicle operated in California may be subject to the California Air Resources Board Regulation to Reduce Particulate Matter and Criteria Pollutant Emissions from In-Use Heavy-Duty Diesel Vehicles. It, therefore, could be subject to exhaust retrofit or accelerated turnover requirements to reduce emissions of air pollutants.
Guaranty Waiver. All property is offered for sale 'AS IS, WHERE IS.' Palo Alto Unified School District, CA makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Description Warranty. Seller warrants to the Buyer that the property offered for sale will conform to its description. Any claim for misdescription must be made prior to removal of the property. If Seller confirms that the property does not conform to the description, Seller will keep the property and refund any money paid. The liability of the seller shall not exceed the actual purchase price of the property. ****** This agency does NOT provide SMOG CERTIFICATION or EMISSIONS RETROFIT******* **All smog related repairs and certifications for vehicles are the sole responsibility of the buyer as outlined in California Vehicle Code, Division 12, Section 24007.5.** TITLE 13 CALIFORNIA CODE DISCLOSURE OF REGULATION APPLICABILITY: An on-road heavy-duty diesel or alternative-diesel vehicle operated in California may be subject to the California Air Resources Board Regulation to Reduce Particulate Matter and Criteria Pollutant Emissions from In-Use Heavy-Duty Diesel Vehicles. It, therefore, could be subject to exhaust retrofit or accelerated turnover requirements to reduce emissions of air pollutants.
Zusätzliche Informationen
Ihr erstes Gebot? Bitte beachten Sie unsere Allgemeine Geschäftsbedingungen.
Beachten Sie für weitere Hilfe unsere Häufig gestellte Fragen.