3D alpha sand printer from Tinker Omega (now Sinto)
$100.00 USD
Cierra:
8h41m(Jun 04, 2026 06:13 PM UTC)
error
Reserva no alcanzada
$10.00 USD
Incremento de la pujaVentas / Tipo de lote:
Subasta en línea
Ubicación:
Waterloo, Iowa, USASujeto a una extensión automática de la hora de finalización de la subasta.
Es posible que no sea una buena puja
La puja mínima es de USD 100.00.
Es esto correcto?
If this is correct, to continue select "Accept Bid."
Si es incorrecto o desea enviar una puja máxima automática, seleccione «Rechazar puja».
Es esto correcto?
If this is correct, to continue select "Accept Bid."
Si es incorrecto o desea enviar una puja máxima automática, seleccione «Rechazar puja».
SEGUIDORES: 12 |VISITANTES: 127
Vendedor
Términos y condiciones del vendedor
Otros artículos del vendedor
Descripción
| Condition | Used/See Description |
| Lot Number | 23704-171 |
Summary
The 3D alpha sand printer from Tinker Omega (now Sinto) is a prototype developed in the United States with the goal of creating a domestically produced printer. It was designed to be competitive with the limited number of similar systems currently available on the market. This printer was a prototype used to test out systems that would later be used on their Large-Scale Sand printer. This printer has a working area of roughly 16” x 14”.
Concerns
As a prototype, the machine has a few issues:
• Printhead Issues: Early versions experienced frequent failures due to problems with the adhesive used in the printheads. This issue has been addressed in more recent iterations by switching to a more reliable adhesive.
• Operating Computer: This printer does not have an attached computer to operate the computer. It will need a computer that can run the operating software to control the system
• Stagnant: The system has been sitting unoperated a long time and may have some issues with it running. There is not much assistance or service available for getting this printer running again
Location
The printer is located on the first floor of TechWorks in Waterloo:
360 Westfield Ave, Waterloo, Iowa 50701
Removal Instructions
Removal must be done by the purchaser. The printer itself has lifting pockets for assistance. An electrician may need to be hired for disconnecting the system.
The 3D alpha sand printer from Tinker Omega (now Sinto) is a prototype developed in the United States with the goal of creating a domestically produced printer. It was designed to be competitive with the limited number of similar systems currently available on the market. This printer was a prototype used to test out systems that would later be used on their Large-Scale Sand printer. This printer has a working area of roughly 16” x 14”.
Concerns
As a prototype, the machine has a few issues:
• Printhead Issues: Early versions experienced frequent failures due to problems with the adhesive used in the printheads. This issue has been addressed in more recent iterations by switching to a more reliable adhesive.
• Operating Computer: This printer does not have an attached computer to operate the computer. It will need a computer that can run the operating software to control the system
• Stagnant: The system has been sitting unoperated a long time and may have some issues with it running. There is not much assistance or service available for getting this printer running again
Location
The printer is located on the first floor of TechWorks in Waterloo:
360 Westfield Ave, Waterloo, Iowa 50701
Removal Instructions
Removal must be done by the purchaser. The printer itself has lifting pockets for assistance. An electrician may need to be hired for disconnecting the system.
Preguntas y respuestas
¿Tiene alguna pregunta o quiere pedir cita?
Información del vendedor
Ubicación del artículo:
Tipo de cuenta:
Gubernamental
Inspección
At the seller’s discretion, inspection may be permitted. Inspection is by appointment only. To request inspection, please click the “Ask a question” hyperlink, if available. If you have additional questions, please visit the FAQs
Pago
PAYMENT
If you are the winning bidder, you will facilitate payment by referring to the My Bids section of your account.Note:
1. Payment is due within 5 (five) business days of auction closure.
2. Any invoice $5,000 or above requires payment via wire transfer.
3. Depending on your history with GovDeals, you may be limited to the number of auctions/transactions that you can participate in simultaneously AND/OR the dollar amount that you can pay via credit card, debit card or direct debit. For additional insight, please visit the Probation FAQ.
SALES TAX
When applicable, sales tax is calculated based upon the auction’s advertised location.If you are seeking sales tax exemption, you must complete Liquidity Services’ tax exemption form(s). We recommend doing this prior to the auction’s closure or before making payment. To do so, please visit Liquidity Services' Tax Exemption Submission Tool.
Eliminación
***SHIPPING IS NOT AVAILABLE***
The buyer is responsible for all aspects of pick-up / removal, including but not limited to packing, loading, transportation and exporting. Note: Shipping is NOT available.
Removal is by appointment only. All items must be picked-up / removed within 10 (ten) business days from auction closure, unless otherwise stated in the asset description. If any item(s) is not removed within the allotted timeframe, the item(s) may be declared abandoned.
At the time of pick-up / removal, you will be required to present the seller with a copy of your Buyer’s Certificate and/or bill of sale, and potentially other documentation (e.g., copy of driver's license, Authorization of Release, etc). When making a removal appointment, please confirm with the seller what is needed to release the item(s).
Instrucciones especiales
NOTICE: If you are the winning bidder and default by failing to adhere to this seller's terms and conditions, your account with Liquidity Services WILL BE LOCKED.
Guaranty Waiver: All property is offered for sale “AS IS, WHERE IS.” (Seller) makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Guaranty Waiver: All property is offered for sale “AS IS, WHERE IS.” (Seller) makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Información adicional
¿Es la primera vez que puja? Eche un vistazo a nuestro Términos y condiciones.
Para obtener más ayuda, eche un vistazo a nuestro Preguntas frecuentes.