SEEPEX Progressive Cavity Pump System Model BCSB 1-24 with Nord Gear Motor

Used Good. Fully functional when last powered. Normal cosmetic wear from production use.

SEEPEX Progressive Cavity Pump System, Model BCSB 1-24, complete with Nord SK12F VL-90LP/4 CUS TW inverter-duty gear motor. Food-grade progressive cavity dosing pump designed for transferring viscous liquids, slurries, concentrates, and metered fluid applications. Pump features 316L stainless steel product-contact components, NBR food-grade stator, and a G66 mechanical seal (carbon/SiC/FPM). Equipped with stainless steel baseplate, sanitary Tri-Clamp connections (1.5" suction, 2" discharge), and pin-joint drive assembly with NBR protective sleeves. Suitable for continuous-duty operation in food, beverage, nutraceutical, or chemical production environments.
Pump Specifications:
Model: SEEPEX BCSB 1-24
Pump Type: Progressive cavity
Product Contact Material: 316L stainless steel
Stator Material: NBR (food grade)
Mechanical Seal: SEEPEX G66 Carbon / Silicon Carbide / FPM
Joint Type: Greased pin joints with NBR sleeves
Suction Connection: 1.5" Tri-Clamp
Discharge Connection: 2" Tri-Clamp
Flow Range: Approx. 0.2 1.5 GPM (depending on speed/pressure)
Pressure Rating: Up to 50 psi
Temperature Range: 6773 F
Speed Range: 14 132 rpm
Required Shaft Power: 0.44 HP
Starting Torque: 80 lb-ft
Duty: Continuous (S1)
Motor / Gear Drive Specifications:
Manufacturer: Nord Gear Corporation
Model: SK12F VL-90LP/4 CUS TW
Power: 2.0 HP
Voltage: 230/460V 3-Phase
Current: 5.6A / 2.8A
Frequency: 60 Hz
Enclosure: IP66, TEFC
Efficiency: IE3 87%
Insulation Class: F
Gear Ratio: 13.39:1
Output Speed: ~129 rpm
Lubrication: Mobil 600 XP220 (0.37 L)
Duty: Continuous, inverter-duty rated
Baseplate & Accessories:
Stainless steel baseplate with anchor holes
1.5" 2" sanitary reducer
2" clamp + gasket
Clean, well-maintained condition
Approx. Dimensions:
Length: 55"
Width: 10"
Height: 14"
Approx. Weight:
125 lbs