2020 Vermeer HG6000 Horizontal Grinder -LOW HOURS
32d20h(Oct 22, 2026 12:00 AM UTC)
$500.00 USD
Bid IncrementOnline Auction — Subject to Seller Approval
Location:
Ashley, Indiana, USASubject to an auto-extension of the auction end time.
Possible Bad Bid
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
WATCHERS: 117 |VISITORS: 105
Taxes
To be added at payment
Buyer's Premium
12.5%
High Bidder
br*****
Seller's Terms & Conditions
Seller's Other Items
Description
| Manufacturer | Vermeer |
| Model | HG6000 |
| Year of Manufacture | 2020 |
| Serial Number | 1VRY39315L10020032 |
| Condition | Used/See Description |
| Odometer/Hours | 588 Hours (Accurate, As Visually Inspected) |
| Lot Number | 31336-2 |
2020 Vermeer HG6000 Horizontal Grinder -LOW HOURS
Just 589 hrs. as of 09-16-26. Stored under roof out of sun & rain.
Starts, runs, & is rarely operated as it was a backup grinder for our TG7000.
CAT18 Diesel Engine, runs great
Still in service
The rig does not require wide load or overweight permits.
Weight = 65,000 lbs. Axles = 3. Tires = 6 super wide singles
38’8” L x 8’2” W x 13’1” T in transport folded position.
Power via 755 H. P. CAT-C18L 6 cylinders.
Electric 24V 2 group 8-D 1155cca. batteries.
Yellow exterior
Minor dents, scratches and dings at intake feed table opening
Minor normal wear to paint at intake feed area -see pictures
Additional equipment: Auto reversing fan, Damage defense, & Air compressor
LCD multifunction at ground side station & hand remote.
At a convenient location in the Midwest in N.E. Ind. at the crossroads of Interstate I-80/90 east west and I-69 north south
Nice clean productive, efficient, easy to operate (single person), and service grinder.
Lower fuel use with smart grind rpm adjust / feed roller down pressure.
Fluids Capacities:
Fuel -350 gallons
Hydraulic -100 gallons
Antifreeze -28 gallons
Grinding Capacities:
Feed table -flare side opening to = 5’ W x 20’L, above slat chain type feed conveyor.
Mill –box opening = 60” W x 32” H, is max feed height to 10 hammers with 20 tips.
Screen area – 3,317” square via two screens.
Infeed roller – 47.2” L x 56.4” W with 36.1” D diameter
Product Discharge:
Sigle belt 48” W x 81’3” L surface design 330# V cleat
If you always wanted a Vermeer but cannot budget new pricing this Vermeer is like a non-current with only demo hours. We would love to have it find a home with another Solid Waste Management Recycling District who would care for it and appreciate and maintain it like we did. We are happy to answer questions.
Sold as is, where is
Final approval of the sale will be determined after the auction closes.
Q & A
Have a question or looking to schedule an appointment?
is that 12 and half on full price or a certain cap on it after it reaches a certain dollar amount 07/29/2026 15:22:12 PM
Hello, Thanks for looking at our Vermeer HG 6000. I am happy to answer any questions you may have about the Vermeer. As for the 12.5% question. Per GovDeals I can advise you the bidder that all fees and payment-related processes are handled by GovDeals and encourage you to contact the GovDeals customer service team directly if you have any questions not posted in the site at 800-613-0156. Thank you Doug 07/30/2026 09:26:18 AM
We would like to schedule a site inspection on 8/5. Is that possible? 07/30/2026 08:34:31 AM
Hello, Thank you for wanting to see our Vermeer HG 6000 in action. However, I will be at Purdue most of 8-5-26. We should have the TG 7000 & the HG 6000 available to see & compare grinding at the Ashley, IN. location that week. Any other day available? Let's go direct. If no other days' work our maintenance supervisor should be free on the 5th. As the site says shown by appointments only. Sincerely, Doug 07/30/2026 09:51:05 AM
do you extra screens or tips or any other wear parts to go with it 08/05/2026 16:57:02 PM
Hello, Thanks for looking at our 2020 Vermeer HG 6000. It was just demoed yesterday 8-5-26 and now has 589.0 hours. Great question thanks for asking. Answer: There are no additional set / sizes of screens, tips, or wear parts included in this auction asset ID #2. All the tips are good for grinding & did yesterday in the demo. All These wear parts can be purchased from your local Vermeer dealer. We are very happy with Vermeer Midwest. Side note auction asset ID #3 our electric forklift does come with the Yale charger station included. We're getting down to the end of the auction this is the last week for both lots. Thankyou Doug 08/06/2026 09:47:19 AM
Seller Information
Item Location:
Account Type:
Government
Inspection
Payment
PAYMENT
If you are the winning bidder, you will facilitate payment by referring to the My Bids section of your account.Note:
1. Payment is due within 5 (five) business days of auction closure.
2. Any invoice $5,000 or above requires payment via wire transfer.
3. Depending on your history with GovDeals, you may be limited to the number of auctions/transactions that you can participate in simultaneously AND/OR the dollar amount that you can pay via credit card, debit card or direct debit. For additional insight, please visit the Probation FAQ.
SALES TAX
When applicable, sales tax is calculated based upon the auction’s advertised location.If you are seeking sales tax exemption, you must complete Liquidity Services’ tax exemption form(s). We recommend doing this prior to the auction’s closure or before making payment. To do so, please visit Liquidity Services' Tax Exemption Submission Tool.
Removal
***SHIPPING IS NOT AVAILABLE***
The buyer is responsible for all aspects of pick-up / removal, including but not limited to packing, loading, transportation and exporting. Note: Shipping is NOT available.
Removal is by appointment only. All items must be picked-up / removed within 10 (ten) business days from auction closure, unless otherwise stated in the asset description. If any item(s) is not removed within the allotted timeframe, the item(s) may be declared abandoned.
At the time of pick-up / removal, you will be required to present the seller with a copy of your Buyer’s Certificate and/or bill of sale, and potentially other documentation (e.g., copy of driver's license, Authorization of Release, etc). When making a removal appointment, please confirm with the seller what is needed to release the item(s).
Special Instructions
Guaranty Waiver: All property is offered for sale “AS IS, WHERE IS.” (Seller) makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Bid History
Bid History refreshes automatically
Asset ID 2 / Bids 9
br*****
September 17, 2026 12:07 AM UTC
USD 35,950.00High Bidder
gr*****
September 17, 2026 12:07 AM UTC
USD 35,750.00
br*****
September 16, 2026 07:18 PM UTC
USD 21,200.00
al*****
September 16, 2026 07:18 PM UTC
USD 21,000.00
br*****
September 16, 2026 07:18 PM UTC
USD 16,200.00
Additional Information
First time bidding? Please review our Terms and Conditions.
For further assistance please review our Frequently Asked Questions.
