2006 Generac SD275 275 kW Industrial Standby Diesel Generator – 277/480V, 3-Phase
6d(Aug 20, 2026 06:00 PM UTC)
$50.00 USD
Bid IncrementOnline Auction — Subject to Seller Approval
Location:
Tempe, Arizona, USASubject to an auto-extension of the auction end time.
Possible Bad Bid
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Description
| Manufacturer | Generac |
| Model | SD275 |
| Year of Manufacture | 2006 |
| Serial Number | 20912222 |
| Condition | Used/See Description |
| Operating Condition | Operational |
| Hours | 322 (Yes, Visually Inspected) |
| Lot Number | 26782-24 |
| Inventory ID | 101 |
2006 Generac SD275 275 kW Industrial Standby Diesel Generator – 277/480V, 3-Phase
Previously used by a government agency as an emergency backup-power generator.
The seller reports that the unit has very low operating hours and was fully operational when removed from service. It was reportedly retired to comply with updated state requirements and not because of a known mechanical or operational issue.
Manufacturer Specifications:
Manufacturer: Generac Power Systems
Series: SD275
Model: 6933950100
Type Code: SD275-K36120D18HPSYC
Generator Serial Number: 2091222
Generac Engine Number: 0A5399
Engine Model: 12.0DTA
Production Date: October 27, 2006
Assembly Date: October 20, 2006
Country of Manufacture: USA
Generator Ratings
Standby Power Rating: 275 kW
Standby Apparent Power: Approximately 344 kVA
Prime Power Rating: 233 kW
Output Voltage: 277/480 Volts
Rated Current: 413.4 Amps
Phase: Three-Phase
Frequency: 60 Hz
Power Factor: 0.8
Rated Speed: 1,800 RPM
Main Circuit Breaker: 500 Amps
Engine Specifications
Engine Type: Industrial diesel
Displacement: 11.945 Liters, commonly designated 12.0 liters
Configuration: Six-cylinder, in-line
Aspiration: Turbocharged and aftercooled
Cooling System: Liquid-cooled
Rated Speed: 1,800 RPM
Starting System: 24-volt DC
Fuel-Injection Pump: Bosch P-type
Manufacturer-Documented Features
Brushless permanent-magnet excitation system
Solid-state voltage regulation
Class H rotor and stator insulation
Four-pole, rotating-field generator
High-coolant-temperature automatic shutdown
Low-coolant-level automatic shutdown
Low-oil-pressure automatic shutdown
Overspeed and overcrank protection
Factory-installed radiator and closed coolant-recovery system
Factory Test Documentation
The included Generac factory test report is dated November 11, 2006. The report documents testing at full rated output of 275 kW, 480/277 volts, three-phase, and 60 Hz. The applicable pre-test, functional, and post-test checks were marked satisfactory at the time of manufacture.
The factory test report documents the generator’s original production testing and should not be interpreted as a current load-bank test or current certification.
Approximate Overall Dimensions
Length: 15 feet 8 inches
Width: 4 feet 8 inches
Height: 6 feet 10 inches
Dimensions were measured onsite and should be independently verified before arranging transportation.
Load-Out and Removal
The buyer is solely responsible for all labor, equipment, rigging, loading, removal, and transportation.
A forklift is not available onsite, and the seller will not provide loading or removal assistance. The buyer must bring all personnel and equipment necessary to safely remove the generator. Crane service will be required.
Inspection and Sale Terms
The generator is sold as-is, where-is, with no warranties or guarantees regarding condition, operating hours, specifications, completeness, or suitability for a particular application.
The seller’s operational statements are based on information available when the unit was removed from service. Bidders are responsible for inspecting the generator and independently verifying all information before bidding.
**Disclaimer: The manufacturer's specifications provided are for reference only, and we disclaim any liability for inaccuracies or discrepancies. Specifications may vary by model or trim, and stock photos are used for illustrative purposes only and may not accurately represent the actual product. Please refer to the actual product for precise details.**
Attachments
Q & A
Have a question or looking to schedule an appointment?
Seller Information
Seller:
Account Type:
Government
Inspection
Payment
PAYMENT
If you are the winning bidder, you will facilitate payment by referring to the My Bids section of your account.
Note:
1. Payment is due within 3 (three) business days of auction closure.
2. Any invoice $5,000 or above requires payment via wire transfer.
3. Depending on your history with GovDeals, you may be limited to the number of auctions that you can participate in simultaneously AND/OR the dollar amount that you can pay via credit/debit card or direct debit. For more insight, please visit the Probation FAQ.
SALES TAX: Vehicles with an auction/item location in Arizona
If you have officially won and are seeking tax exemption, you must complete Liquidity Services’ tax form. Please click the applicable hyperlink below.
**If you are removing the vehicle yourself, a 90-day permit is required. Please contact Cashiers@sierraauction.com to obtain the permit. The fee is $55. If a transporter is handling the pickup, a Bill of Lading must be provided.**
Bidders within a Native American Reservation in Arizona
SALES TAX: All items except for vehicles with an auction/item location in Arizona
If you are seeking tax exemption, you must complete Liquidity Services’ tax form(s).
**Please refer to the Removal Instructions section for detailed steps required to schedule the pickup of your vehicle.**
Removal
Important Pickup Instructions
To receive your pickup details and have the title and vehicle released, please complete the steps below. Once all requirements are done, our team will provide the pickup contact information and location details.
- Payment & Bidder Agreement (If Applicable)
If you paid by credit card or Paypal:
Complete the Bidder Agreement Form and Upload a valid government-issued photo ID using [THIS LINK]
If you paid by Wire:
No Bidder Agreement is required
- If Sending a Representative:
If someone else will be picking up on your behalf, please email the representative’s full name to cashiers@sierraauction.com.
The representative must present a valid ID and sign for the item(s) at the time of pickup.
Buyer Responsibilities:
The buyer is responsible for all aspects of item removal, including but not limited to packing, loading, transportation, and exporting.
Pickup Deadline:
All items must be picked up and removed within five (5) business days from the auction close, unless otherwise stated in the asset description.
Items not removed within this timeframe may result in one or more of the following actions: (1) the item(s) may be declared abandoned with no refund provided, (2) storage fees of $20 per day may be charged, or (3) the sale may be canceled and a fee equal to the Buyer’s Premium may be assessed.
Load-Out Information:
Buyers are responsible for their own load-out, rigging, removal, and transport. A forklift is not available on-site and no assistance will be provided.
Title Information:
Titles are mailed to the address and name listed on the Buyer’s Certificate.
To request a change of address, name transfer, or other title update, email our Title Department at jessica.miranda@sierraauction.com within three (3) days of the auction closing.
Requests received after this period may incur additional fees, including a $25 returned title fee and/or a $95 duplicate title fee.
Please allow up to 30 days to receive your title.
Important Notice – Shipping Not Available
Shipping is NOT available. Buyers must make their own arrangements for vehicle pickup and transport.
Special Instructions
NOTICE: If you are the winning bidder and default by failing to adhere to this seller's terms and conditions, your account with Liquidity Services WILL BE LOCKED.
Guaranty Waiver: All property is offered for sale “AS IS, WHERE IS.” (Seller) makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Vehicle Titles: All titles will be held for 7-10 business days, and then mailed to you at your address on file via USPS certified. For any title questions or address updates, please contact Jessica Miranda at Titletracker@sierraauction.com and reference your Bill of Sale ID number.
Bid History
Bid History refreshes automatically
Asset ID 24 / Bids 18
sp*****
August 12, 2026 05:14 AM UTC
USD 3,550.00High Bidder
ip*****
August 12, 2026 05:14 AM UTC
USD 3,500.00
sp*****
August 12, 2026 05:14 AM UTC
USD 3,500.00
ip*****
August 12, 2026 05:14 AM UTC
USD 3,025.00
sp*****
August 12, 2026 05:14 AM UTC
USD 3,000.00
Additional Information
First time bidding? Please review our Terms and Conditions.
For further assistance please review our Frequently Asked Questions.