2016 Taylor Power Systems TD250 Diesel Generator Set | Cummins QSL9-G3NR3 | 250 kW | ~360hrs | 120/208V, 3-Phase. 4-Wire
10d5h(Apr 21, 2026 03:30 PM UTC)
$50.00 USD
Bid IncrementOnline Auction — Subject to Seller Confirmation
Location:
Claremont, New Hampshire, USAPossible Bad Bid
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Description
| Manufacturer | Taylor Power Systems |
| Model | TD250/QSL9-G3NR3 |
| Year of Manufacture | 2016 |
| Condition | Used/See Description |
| Odometer/Hours | Hours |
| Lot Number | 22983-43 |
SPECIFICATIONS
Year: 2016
Manufacturer: Taylor Power Systems
Model: TD250
Fuel: Diesel
Full Model: TD250/QSL9-G3NR3
Serial Number: TP30635
Engine: Cummins QSL9-G3 NR3 Diesel | EPA Tier 3
Rated Output: 250 kW Standby
Voltage: 120/208V, 3-Phase, 4-Wire
Amperage: 868A
Power Factor: 0.8
Frequency: 60 Hz
Control Panel: Deep Sea Electronics (DSE) Series
Enclosure: Sound-attenuated, weatherproof
Base Fuel Tank: Taylor-Basier RDP-110 | 1,425-gallon undermount AST (empty at pickup) with secondary containment
Runtime Hours: Approximately 360
Manufacture Date: August 2016
MAINTENANCE HISTORY
Maintained under service agreement with Powers Generator Service since installation in 2017. 2-hour load bank test passed February 2025. Final PM completed September 2, 2025 at 358.75 hours shortly before decommissioning and can be shared with serious bidders. Approximately 360 total runtime hours. No known deficiencies at time of decommissioning. The undermount base fuel tank has been drained to the extent practicable. Residual sludge or fuel remnants may remain.
INCLUDED
Taylor TD250 generator set in sound-attenuated weatherproof enclosure. 1,425-gallon undermount base fuel tank. See diagram for configurations and dimensions.
NOT INCLUDED
Automatic Transfer Switch, control wiring, automatic leak detection system, or accessories of any kind.
REMOVAL & LOGISTICS
Unit is fully disconnected from electrical service. Tank will be empty of fuel. Location accessible for crane truck or forklift. Buyer responsible for all rigging, loading, and transport. Sullivan County provides no equipment or labor for removal. Must be removed no later than May 5, 2026. Pickup by appointment only.
Pickup Location: Sullivan County Health Care, 5 Nursing Home Drive, Unity, NH 03743 - Map programs often list a Claremont, NH.
INSPECTION
Available by appointment. Contact Sullivan County Facilities & Operations to schedule via "ASK A QUESTION" link. Inspections windows are weekdays from 9am - 1pm.
SALE TERMS
Sold as-is, where-is. No warranties expressed or implied. No representations regarding fitness for purpose. All sales final. Buyer assumes all liability for removal and transport. Buyer assumes full responsibility for compliance with all applicable federal, state, and local regulations governing the transport, reinstallation, registration, and operation of the AST at the receiving facility, including but not limited to NHDES and NH Fire Marshal's Office requirements.
Attachments
Q & A
Have a question or looking to schedule an appointment?
Seller Information
Seller:
Account Type:
Government
Inspection
Payment
PAYMENT
If you are the winning bidder, you will facilitate payment by referring to the My Bids section of your account.Note:
1. Payment is due within 5 (five) business days of auction closure.
2. Any invoice $5,000 or above requires payment via wire transfer.
3. Depending on your history with GovDeals, you may be limited to the number of auctions/transactions that you can participate in simultaneously AND/OR the dollar amount that you can pay via credit card, debit card or PayPal. For additional insight, please visit the Probation FAQ.
SALES TAX
When applicable, sales tax is calculated based upon the auction’s advertised location.If you are seeking sales tax exemption, you must complete Liquidity Services’ tax exemption form(s). We recommend doing this prior to the auction’s closure or before making payment. To do so, please visit Liquidity Services' Tax Exemption Submission Tool.
Removal
***SHIPPING IS NOT AVAILABLE***
The buyer is responsible for all aspects of pick-up / removal, including but not limited to packing, loading, transportation and exporting. Note: Shipping is NOT available.
Removal is by appointment only. All items must be picked-up / removed within 10 (ten) business days from auction closure, unless otherwise stated in the asset description. If any item(s) is not removed within the allotted timeframe, the item(s) may be declared abandoned.
At the time of pick-up / removal, you will be required to present the seller with a copy of your Buyer’s Certificate and/or bill of sale, and potentially other documentation (e.g., copy of driver's license, Authorization of Release, etc). When making a removal appointment, please confirm with the seller what is needed to release the item(s).
Special Instructions
Guaranty Waiver: All property is offered for sale “AS IS, WHERE IS.” (Seller) makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Bid History
Bid History refreshes automatically
Asset ID 43 / Bids 4
4j*****
April 10, 2026 12:14 AM UTC
USD 5,150.00High Bidder
sr*****
April 10, 2026 12:14 AM UTC
USD 5,100.00
sr*****
April 08, 2026 10:58 PM UTC
USD 5,050.00
4j*****
April 08, 2026 10:50 PM UTC
USD 5,000.00
Additional Information
First time bidding? Please review our Terms and Conditions.
For further assistance please review our Frequently Asked Questions.