Liquidity Services Brands
2009 Caterpillar 299C Skid Steer
$100.00 USD
Bid IncrementSales/Lot Type:
Online Auction
Location:
Muskogee, Oklahoma, USASubject to an auto-extension of the auction end time.
Possible Bad Bid
The Minimum Bid is USD 22,700.00.
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Description
Make/Brand
Caterpillar
Model
299C
Year
2009
Hours
2,120.00 (Accurate?: )
VIN/Serial
CAT0299CHJSP00465
Lot#
29040-5
Condition
Used/See Description
2009 Caterpillar 299C Skid Steer (Track Loader)
Runs and operates - normal wear and tear
2,120 HRS showing
SPECS FROM CATERPILLAR WEBSITE:
Engine Model ...................... Cat C3.4 DIT
Engine Type ...................... 4-cycle liquid-cooled diesel
Number of Cylinders ...................... 4, in-line
Displacement, cu.in (L) ...................... 201.2 (3.31)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.72 (120.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 90.0 (67.0)
Maximum Engine Power, hp (kW) ...................... 94.0 (70.0)
Rated Engine Speed, rpm ...................... 2500
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubrication System ...................... Forced circulation
Cooling System ...................... Forced water cooling by centrifugal pump
Air Cleaner ...................... Dual element, radial seal
Fuel Tank Capacity, gal (L) ...................... 25.8 (98.0)
Oil Capacity, qts (L) ...................... 10.6 (10.0)
Coolant Capacity, qts (L) ...................... 14.8 (14.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90
Drive Train
Drive System Type ...................... Hydrostatic
Number of Gears ...................... 2 (low/high)
Pump Type ...................... Axial-piston
Brakes Type ...................... Wet multi disc
Final Drive Capacity, qts (L) ...................... 1.1 (1.0)
Forward Speed (Low range), mph (kph) ...................... 5.0 (8.1)
Reverse Speed (Low range), mph (kph) ...................... 5.0 (8.1)
Forward Speed (High range), mph (kph) ...................... 8.5 (13.6)
Reverse Speed (High range), mph (kph) ...................... 8.5 (13.6)
Undercarriage
Tracks Type ...................... Steel embedded rubber track
Track Width (Std), in (mm) ...................... 17.7 (450)
Track Width (Opt), in (mm) ...................... 15.8 (400)
Track Rollers (per Side) ...................... 5 triple-flanged rollers
Track Idlers (per Side) ...................... 2 triple-flanged idlers
Hydraulic System
Hydraulic System Type ...................... Axial piston pump variable displacement
Pump Flow (Std), gpm (Lpm) ...................... 22.0 (84.0)
Pump Flow (High XPS), gpm (Lpm) ...................... 33.0 (125.0)
System Pressure (Std), Bar (psi) ...................... 230 (3335)
System Pressure (High XPS), Bar (psi) ...................... 280 (4060)
Hydraulic Tank Capacity, gal (L) ...................... 10.3 (39.0)
Hydraulic System Capacity, gal (L) ...................... 15.0 (57.0)
Loader Performance
Rated Operating Capacity, lbs (kg) ...................... 2905 (1318)
Tipping Load, lbs (kg) ...................... 8340 (3780)
Bucket Breakout Force, lbs (kg) ...................... 7310 (3315)
Ground Pressure, Bar (psi) ...................... 0.29 (4.3)
Dimensions and Weight
Length (w/o Bucket), in (mm) ...................... 122.1 (3100)
Length (Bucket On Ground), in (mm) ...................... 150.4 (3820)
Length (Ground Contact), in (mm) ...................... 69.6 (1765)
Length of Track, in (mm) ...................... 89.4 (2270)
Height (Operator Cab), in (mm) ...................... 83.3 (2115)
Height (Boom Raised), in (mm) ...................... 162.3 (4120)
Width (w/o Bucket, Standard Track), in (mm) ...................... 78 (1980)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 129.4 (3285)
Height to Hinge Pin (Carry Position), in (mm) ...................... 7.7 (195)
Dump Angle At Max Height, deg ...................... 51
Dump Height (Fully Raised), in (mm) ...................... 98.1 (2495)
Seller Information
Seller:
Item Location:
Account Type:
Commercial
Inspection
At the seller’s discretion, inspection may be permitted. Inspection is by appointment only. To request inspection, please click the “Ask a question” hyperlink, if available. If you have additional questions, please visit the FAQs
Payment
PAYMENT
If you are the winning bidder, you will facilitate payment by referring to the My Bids section of your account.Note:
1. Payment is due within 5 (five) business days of auction closure.
2. Any invoice $5,000 or above requires payment via wire transfer.
3. Depending on your history with GovDeals, you may be limited to the number of auctions/transactions that you can participate in simultaneously AND/OR the dollar amount that you can pay via credit card, debit card or PayPal. For additional insight, please visit the Probation FAQ.
SALES TAX
When applicable, sales tax is calculated based upon the auction’s advertised location.If you are seeking sales tax exemption, you must complete Liquidity Services’ tax exemption form(s). We recommend doing this prior to the auction’s closure or before making payment. To do so, please visit Liquidity Services' Tax Exemption Submission Tool.
Removal
***SHIPPING IS NOT AVAILABLE***
The buyer is responsible for all aspects of pick-up / removal, including but not limited to packing, loading, transportation and exporting. Note: Shipping is NOT available.
Removal is by appointment only. All items must be picked-up / removed within 10 (ten) business days from auction closure, unless otherwise stated in the asset description. If any item(s) is not removed within the allotted timeframe, the item(s) may be declared abandoned.
At the time of pick-up / removal, you will be required to present the seller with a copy of your Buyer’s Certificate and/or bill of sale, and potentially other documentation (e.g., copy of driver's license, Authorization of Release, etc). When making a removal appointment, please confirm with the seller what is needed to release the item(s).
Special Instructions
NOTICE: If you are the winning bidder and default by failing to adhere to this seller's terms and conditions, your account with Liquidity Services WILL BE LOCKED.
Guaranty Waiver: All property is offered for sale “AS IS, WHERE IS.” (Seller) makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Guaranty Waiver: All property is offered for sale “AS IS, WHERE IS.” (Seller) makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
Additional Information
First time bidding? Please review our Terms and Conditions.
For further assistance please review our Frequently Asked Questions.