Liquidity Services Brands
CARRIER TRANSICOLD REFRIGERATED CONTAINER WITH BACK UP POWER
$100.00 USD
Closes:
5d22h(Aug 30, 2025 07:46 PM UTC)
error
Reserve Not Met
$25.00 USD
Bid IncrementSales/Lot Type:
Online Auction
Location:
Houston, Texas, USASubject to an auto-extension of the auction end time.
Possible Bad Bid
The Minimum Bid is USD 100.00.
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Description
Lot#
16223-74
Condition
Used/See Description
Mobile refrigerated container with power backup
DescriptionA reefer container, also known as a refrigerated container, is an insulated container equipped with a cooling device. This unit is electrically powered, allowing it to be transported in the reefer container for longer periods of time.
If you are looking for reefer containers to buy, we are always ready to help you.
Reefer containers are commonly used to transport fruits, vegetables or other products. They can control humidity and the required temperature throughout the entire flight. In addition to transportation, reefer containers are also used for refrigerated warehouses in supermarkets, restaurants and public events agencies.Length: 2991 mm
Width: 2438 mm
Height: 2591 mmExternal dimensionsInner dimensionsLength: 2790 mm
Width: 2286 mm
Height: 2269 mmSpecificationsCompressor: Scroll or piston
Condition: New or used
Volume: 15.8 cubic meters
Container type: Refrigerated
Container model: Standard
Applied refrigerants: R12 R134A R404A R409A
Freon: R134a
Max total weight: 10160 kg
Net weight: 2290 kg
Max load capacity: 7870 kg
Cooling capacity: 2900-4200 kcal/hour
Heating capacity: 4200-4400 kcal/hour
Average energy consumption: 4,6 kW
Supply voltage: 360/460 V, 3 phases, 50 Hz
Supported temperature range: from -40°C to +30°C
Number of accommodated euro pallets (1200 x 800mm), pcs: 5Warranty- The warranty period for the Products is 3 (three) months from the date of transfer of ownership to the Customer and applies to the following equipment that is an integral part of the refrigerated container: compressor, controller.
- The warranty is valid provided that the specified equipment is put into operation and maintained by refrigeration equipment professionals who have the appropriate licenses and permits.
- The warranty does not include equipment maintenance during the warranty period.The advantages of this container:- Ability to preserve the freshness of goods with special requirements for storage temperature;
- Long-term preservation of the set temperature even when the refrigeration unit is de-energized;
- Convenience of unloading and loading operations, due to the standardized dimensions of refrigerated containers and the presence of special devices.Refrigeration equipment consists of two main units: a refrigeration unit and a body.- Supporting frame;
- Walls made of sandwich panels. The outer coating is made of 2.0 mm thick duralumin or profiled steel, a polyurethane foam insulation layer and 0.6 mm thick profiled food grade corrosion-resistant steel;
- Floor. For its manufacture, a T-shaped profile made of aluminum alloy is used, designed for handling goods using warehouse trucks;
- Door. It is made of the same sandwich panels as the walls, equipped with special locks that ensure a
refrigerated container
Inspection
Onsite inspections are prohibited. Online inspection, only. As this asset is being sold as-is, where-is, please bid accordingly.
Payment
When the lot is awarded, the winning bidder will receive a buyer certificate - payment instructions are provided within the buyer certificate. Further information regarding payment can be found in section 5 of the buyer's terms and conditions.
Full Payment is due no later than three (3) business days from the time and date of the close of the auction. Buyer's not making payment within three (3) business days may be defaulted for non-payment and their account will be suspended
TAX EXEMPTION: Where taxes are applicable, it is the responsibility of the bidder to provide Tax Exempt documents. Buyer must send Tax Exempt documents to support@networkintl.com within 48 hours of the auction close and before payment is made.
Full Payment is due no later than three (3) business days from the time and date of the close of the auction. Buyer's not making payment within three (3) business days may be defaulted for non-payment and their account will be suspended
TAX EXEMPTION: Where taxes are applicable, it is the responsibility of the bidder to provide Tax Exempt documents. Buyer must send Tax Exempt documents to support@networkintl.com within 48 hours of the auction close and before payment is made.
Removal
- Seller will assist with loading asset(s) onto buyer conveyance
- Buyer is responsible for securing load and transportation costs
- Buyer will receive Load Out Advice/Authorization for Release (LOA), once payment and seller required documents have been satisfied
- Buyer or Buyer's removal agent must have LOA on-hand at the time of removal
- Removal is by appointment, only. At a minimum, Buyer must Schedule removal appointment with Yard Contact listed on LOA, 48 hours in advance
- Buyer must remove asset(s) within ten (10) business days from the time and date of the close of the auction. If there is a mutual agreement between the Buyer and the Yard Contact extending beyond the ten (10) business days, it is the responsibility of the Buyer to properly document this agreement in writing. Items remaining onsite beyond ten (10) business days from the time and date of the close of the auction will be considered abandoned in place
- Buyer or Buyer's removal agent must satisfy Seller's onsite safety protocol. At a minimum, the Buyer or Buyer's removal agent must wear steel toe boots, long pants, a hard hat, and safety glasses. The Yard Contact can provide additional instructions when the Buyer schedules the appointment
- If the Buyer or Buyer's removal agent does not adhere to these requirements, the Seller reserves the right to cease the removal at any stage
- Buyer is responsible for securing load and transportation costs
- Buyer will receive Load Out Advice/Authorization for Release (LOA), once payment and seller required documents have been satisfied
- Buyer or Buyer's removal agent must have LOA on-hand at the time of removal
- Removal is by appointment, only. At a minimum, Buyer must Schedule removal appointment with Yard Contact listed on LOA, 48 hours in advance
- Buyer must remove asset(s) within ten (10) business days from the time and date of the close of the auction. If there is a mutual agreement between the Buyer and the Yard Contact extending beyond the ten (10) business days, it is the responsibility of the Buyer to properly document this agreement in writing. Items remaining onsite beyond ten (10) business days from the time and date of the close of the auction will be considered abandoned in place
- Buyer or Buyer's removal agent must satisfy Seller's onsite safety protocol. At a minimum, the Buyer or Buyer's removal agent must wear steel toe boots, long pants, a hard hat, and safety glasses. The Yard Contact can provide additional instructions when the Buyer schedules the appointment
- If the Buyer or Buyer's removal agent does not adhere to these requirements, the Seller reserves the right to cease the removal at any stage
Special Instructions
SELLER TERMS: If applicable, Signed Terms of Sale may be required prior to the release of this asset(s). By visiting location of this material or placing a bid on this lot, prospective Buyer agrees they have read, understand, and agree to abide by these terms.
NOTICE: If you are the winning bidder and default by failing to adhere to this Seller's Terms and Conditions, your account with Liquidity Services WILL BE LOCKED.
GUARANTY WAIVER: All property is offered for sale 'AS IS, WHERE IS.' Seller makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
DESCRIPTION WARRANTY: Seller warrants to the Buyer that the property offered for sale will conform to its description. Any claim for misdescription must be made prior to removal of the property. If Seller confirms that the property does not conform to the description, Seller will keep the property and refund any money paid. The liability of the Seller shall not exceed the actual purchase price of the property.
BIDS BELOW RESERVE: If applicable, final bids below a reserve price are binding for seven (7) calendar days and will be presented to the Seller, who may decline the offer, accept the offer, or submit a counter offer.
NOTICE: If you are the winning bidder and default by failing to adhere to this Seller's Terms and Conditions, your account with Liquidity Services WILL BE LOCKED.
GUARANTY WAIVER: All property is offered for sale 'AS IS, WHERE IS.' Seller makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
DESCRIPTION WARRANTY: Seller warrants to the Buyer that the property offered for sale will conform to its description. Any claim for misdescription must be made prior to removal of the property. If Seller confirms that the property does not conform to the description, Seller will keep the property and refund any money paid. The liability of the Seller shall not exceed the actual purchase price of the property.
BIDS BELOW RESERVE: If applicable, final bids below a reserve price are binding for seven (7) calendar days and will be presented to the Seller, who may decline the offer, accept the offer, or submit a counter offer.
Additional Information
First time bidding? Please review our Terms and Conditions.
For further assistance please review our Frequently Asked Questions.