Liquidity Services Brands
8 INCH SLIP ON FLANGES
$100.00 USD
Closes:
8d22h(Sep 01, 2025 06:07 PM UTC)
$25.00 USD
Bid IncrementSales/Lot Type:
Online Auction
Location:
Houston, Texas, USASubject to an auto-extension of the auction end time.
Possible Bad Bid
The Minimum Bid is USD 100.00.
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Is this correct?
If this is correct, to continue select "Accept Bid."
If this is incorrect or you want to submit as a Max Auto Bid, select "Reject Bid."
Description
Lot#
16223-86
Condition
New/Unused
Explanation of an 8-Inch Slip-On Flange:
Definition:
A slip-on flange is a type of pipe flange designed to slip over the end of a pipe and then be fillet welded on both the inside and outside to secure it.
Size and Class:
An "8 inch" designation refers to the nominal pipe size (NPS) the flange is designed to fit. Flanges also have a pressure class (e.g., Class 150), indicating their pressure-temperature ratings.
Material:
These flanges are commonly made from forged steel (like carbon steel or stainless steel) for durability and performance.
Features:
They typically have a raised face (RF) or flat face (FF) where the gasket is placed to create a seal when bolted to another flange. They also have a specific number of bolt holes for connection.
Applications:
Slip-on flanges are widely used in various industries for connecting piping systems, particularly in applications where ease of alignment and quick installation are important, often in lower-pressure environments compared to weld neck flanges.
Inspection
Onsite inspections are prohibited. Online inspection, only. As this asset is being sold as-is, where-is, please bid accordingly.
Payment
When the lot is awarded, the winning bidder will receive a buyer certificate - payment instructions are provided within the buyer certificate. Further information regarding payment can be found in section 5 of the buyer's terms and conditions.
Full Payment is due no later than three (3) business days from the time and date of the close of the auction. Buyer's not making payment within three (3) business days may be defaulted for non-payment and their account will be suspended
TAX EXEMPTION: Where taxes are applicable, it is the responsibility of the bidder to provide Tax Exempt documents. Buyer must send Tax Exempt documents to support@networkintl.com within 48 hours of the auction close and before payment is made.
Full Payment is due no later than three (3) business days from the time and date of the close of the auction. Buyer's not making payment within three (3) business days may be defaulted for non-payment and their account will be suspended
TAX EXEMPTION: Where taxes are applicable, it is the responsibility of the bidder to provide Tax Exempt documents. Buyer must send Tax Exempt documents to support@networkintl.com within 48 hours of the auction close and before payment is made.
Removal
- Seller will assist with loading asset(s) onto buyer conveyance
- Buyer is responsible for securing load and transportation costs
- Buyer will receive Load Out Advice/Authorization for Release (LOA), once payment and seller required documents have been satisfied
- Buyer or Buyer's removal agent must have LOA on-hand at the time of removal
- Removal is by appointment, only. At a minimum, Buyer must Schedule removal appointment with Yard Contact listed on LOA, 48 hours in advance
- Buyer must remove asset(s) within ten (10) business days from the time and date of the close of the auction. If there is a mutual agreement between the Buyer and the Yard Contact extending beyond the ten (10) business days, it is the responsibility of the Buyer to properly document this agreement in writing. Items remaining onsite beyond ten (10) business days from the time and date of the close of the auction will be considered abandoned in place
- Buyer or Buyer's removal agent must satisfy Seller's onsite safety protocol. At a minimum, the Buyer or Buyer's removal agent must wear steel toe boots, long pants, a hard hat, and safety glasses. The Yard Contact can provide additional instructions when the Buyer schedules the appointment
- If the Buyer or Buyer's removal agent does not adhere to these requirements, the Seller reserves the right to cease the removal at any stage
- Buyer is responsible for securing load and transportation costs
- Buyer will receive Load Out Advice/Authorization for Release (LOA), once payment and seller required documents have been satisfied
- Buyer or Buyer's removal agent must have LOA on-hand at the time of removal
- Removal is by appointment, only. At a minimum, Buyer must Schedule removal appointment with Yard Contact listed on LOA, 48 hours in advance
- Buyer must remove asset(s) within ten (10) business days from the time and date of the close of the auction. If there is a mutual agreement between the Buyer and the Yard Contact extending beyond the ten (10) business days, it is the responsibility of the Buyer to properly document this agreement in writing. Items remaining onsite beyond ten (10) business days from the time and date of the close of the auction will be considered abandoned in place
- Buyer or Buyer's removal agent must satisfy Seller's onsite safety protocol. At a minimum, the Buyer or Buyer's removal agent must wear steel toe boots, long pants, a hard hat, and safety glasses. The Yard Contact can provide additional instructions when the Buyer schedules the appointment
- If the Buyer or Buyer's removal agent does not adhere to these requirements, the Seller reserves the right to cease the removal at any stage
Special Instructions
SELLER TERMS: If applicable, Signed Terms of Sale may be required prior to the release of this asset(s). By visiting location of this material or placing a bid on this lot, prospective Buyer agrees they have read, understand, and agree to abide by these terms.
NOTICE: If you are the winning bidder and default by failing to adhere to this Seller's Terms and Conditions, your account with Liquidity Services WILL BE LOCKED.
GUARANTY WAIVER: All property is offered for sale 'AS IS, WHERE IS.' Seller makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
DESCRIPTION WARRANTY: Seller warrants to the Buyer that the property offered for sale will conform to its description. Any claim for misdescription must be made prior to removal of the property. If Seller confirms that the property does not conform to the description, Seller will keep the property and refund any money paid. The liability of the Seller shall not exceed the actual purchase price of the property.
BIDS BELOW RESERVE: If applicable, final bids below a reserve price are binding for seven (7) calendar days and will be presented to the Seller, who may decline the offer, accept the offer, or submit a counter offer.
NOTICE: If you are the winning bidder and default by failing to adhere to this Seller's Terms and Conditions, your account with Liquidity Services WILL BE LOCKED.
GUARANTY WAIVER: All property is offered for sale 'AS IS, WHERE IS.' Seller makes no warranty, guaranty or representation of any kind, expressed or implied, as to the merchantability or fitness for any purpose of the property offered for sale. Please note that upon removal of the property, all sales are final.
DESCRIPTION WARRANTY: Seller warrants to the Buyer that the property offered for sale will conform to its description. Any claim for misdescription must be made prior to removal of the property. If Seller confirms that the property does not conform to the description, Seller will keep the property and refund any money paid. The liability of the Seller shall not exceed the actual purchase price of the property.
BIDS BELOW RESERVE: If applicable, final bids below a reserve price are binding for seven (7) calendar days and will be presented to the Seller, who may decline the offer, accept the offer, or submit a counter offer.
Additional Information
First time bidding? Please review our Terms and Conditions.
For further assistance please review our Frequently Asked Questions.