Is this the same printer as was listed in July? 1) Does the nozzle and bed reaches target temp set from the menu? 2) I understand this is a very big ask and it will be okay if you can't perform but will it be possible to manually extrude a few mm through the nozzle once it's up to temp, and see if filament actually comes out the tip? Since this is not used for a year this would help. 3) During homing , does it complete without error or grinding noise, and does it stop cleanly at all three endstops? 4) Nice to know - any error messages ever pop up on the screen during power-on or when idle (thermal runaway warnings, "MIN TEMP" errors, etc.) 08/25/2026 12:38:45 PM

This is the same make, model and year printer as before, but is a physically separate printer. Using the menu, I was able to move the print head from one side to the other as well as up and down. I also moved the printing plate. No abnormal noises, such as grinding, scraping. I also heated the nozzle and bed up and both reached the desired temp and I could feel the heat from both with my hand. I have no filament to test with. I also calibrated the bed and nozzle and no errors were displayed. No errors appeared on the display at any time. 08/25/2026 21:23:21 PM